Installing Optional Daughterboards On The Mp20S; Figure 3.4 Installing The Processor - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL
2) Align the MP20S card to the guardrails of slot 0 of the main cabinet, and slide the MP20S
card into the slot.
3) Push the front panel until the board is completely inserted into the OfficeServ 7200-S slot
0.

3.2.2 Installing Optional Daughterboards on the MP20S

Two (2) types of optional daughterboard can be installed on the MP20S:
1) Optional modem daughterboard (installed in the connector located towards the back of
the MP20S)
2) The optional 4SWM LAN daughterboard (installed in the connector located towards the
front of the MP20S)
The optional modem daughterboard is mounted to connector P7 of the MP20S card. This
modem daughterboard allows remote dial up connection to the system for system
administration and configuration. This is an alternative method for connecting to the system
when a LAN/WAN connection is unavailable. The modem board has the following functions:
• The MP20S card supports a 2-Wire Full Duplex modem board. This is the same modem
used on the OfficeServ 500 system.
• The modem board operates in OfficeServ 7200-S via V.24 interface. In addition, the
modem board supports V.90 protocol. OfficeServ 7200-S controls the modem board via
Figure 3.4 Installing the Processor Board (1)
Figure 3.5 Installing the Processor Board (2)
3.5
Home Page
INSTALLATION
PART 3 MAY 2010