OfficeServ 7200-S
TECHNICAL MANUAL
PARTS
The Offiserv 7150 cabinet (KP-OSDBRES/XAR) comes with the following parts:
• PoE Cable 1 each
• Battery cable 1 each
• AC Power cable(110V Type) 1 each
• Alarm cable 1each (not used for OfficeServ 7200-S systems)
• 19" Rack mount kit 1set
The POE-M PSU modules are sold separately. Extra PoE cables can be purchased if needed.
OFFICESERV 7150 INSTALLATION
Electric Shock
Make sure to turn this product OFF before servicing. Handling this product with AC power ON
may cause electric shock.
Safety Conditions
•
Follow all site requirements listed in section 1.1.1.
•
Before installing OfficeServ 7150 PoE, check electric cable connection, grounding,
voltage and frequency status.
•
The building where OfficeServ 7150 PoE is installed should be protected properly against
lightning and electric leakage using arresters or grounding.
•
OfficeServ 7150 PoE must be mounted on a leveled surface or rack..
•
Keep the OS7150 away from static electricity.
•
Input power of OfficeServ 7150 PoE should be AC 88~264V. Do not use the system with
motors or compressors.
Temperature/Humidity Conditions
Following environmental conditions should be maintained:
•
Operating Temperature : 32º~113ºF
•
Storage Temperature : 14º ~ 122ºF
•
Humidity : 10~90%
The system should be installed at a cool, dust-free place without direct sun light and proper
air ventilation.
5.6
Home Page
INSTALLATION
PART 5 MAY 2010