Mp20S Leds - Samsung OfficeServ 7200-S Installation Manual

OfficeServ 7200-S
TECHNICAL MANUAL

3.2.3 MP20S LEDs

The front view of the MP20S card is shown in the picture below.
The MP20S front panel components have the functions below:
Ports & LEDs
P1~P4 Ports
MISC Port
Media Card
LAN Port
SIO Port
RST Button
RUN LED
LAN LED
Figure 3.9 Front View of the MP20S
Table 3.4 Ports and LEDs of the MP20S
Function Description
Connection ports for the 4DLM or 4SWM daughtercards when installed
on the MP20S.
Port that connects external MOH/BGM sources, paging device, loud bell
or common bell.
Slot for installing the MP20S SD media storage card. This card contains
the main system software, system configuration database, and
voicemail greetings and messages.
Port for establishing the 10 Base-T/100 Base-Tx Ethernet connection.
This allows the MP20S to be connected to a data network.
Serial port (Samsung use ONLY).
Button for resetting the MP20S card.
This LED indicates the status of the main CPU operation.
- Off: Power is not connected.
- On (Green): Booting, reset.
- Blink (Green): The program is operating properly.
This LED indicates the status of the connection to LAN.
- Off: MP20S is not connected to LAN.
- On (Green): MP20S is connected LAN.
- Blink (Green): MP20S is transmitting or receiving data through LAN
port.
3.8
Home Page
INSTALLATION
PART 3 MAY 2010