Makita EVH2000 Original Instruction Manual page 13

1) Before starting the engine, always confirm that the chemical tank contains
fluid.
2) Turn the nozzle lever to the CLOSED position.
3) Rotate the pressure dial and align the STARTING tab with the mark.
1) When the engine is cold, or when the fuel it refueled
(1) Set this machine on a flat space.
(2) Set the I-O switch to " I " position.
(3) Make sure that the throttle lever is the SLOW position.
(4) Continue to push the primer pump untill fuel enters into the primer pump.
• In general, fuel enters into the carburetor by 7 to 10 Pushes.
• If the primer pump is pushed excessively, an excess of gasoline returns to
the fuel tank.
(5) Lifting the choke lever of the air cleaner right side, close the choke lever.
"STARTING" TAB
PRESSURE DIAL
SLOW
Throttle lever
Primer pump
1
NOZZLE LEVER
CLOSED
(ON)
switch
Close