ENGLISH (Original instructions) SPECIFICATIONS Model BDF441 BDF451 Steel 13 mm 13 mm Wood 50 mm 65 mm Capacities Wood screw 6 mm x 75 mm 10 mm x 89 mm Machine screw 6 mm High (3) 0 - 1,700 No load speed (min...
Page 3
Do not expose power tools to rain or wet 18. Do not use the power tool if the switch does conditions. Water entering a power tool will not turn it on and off. Any power tool that increase the risk of electric shock. cannot be controlled with the switch is dangerous Do not abuse the cord.
Page 4
29. Follow instruction lubricating result in a risk of overheating, possible burns changing accessories. and even an explosion. 30. Keep handles dry, clean and free from oil and If electrolyte gets into your eyes, rinse them grease. out with clear water and seek medical GEB051-4 attention right away.
Overloaded: • FUNCTIONAL DESCRIPTION The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the trigger switch on CAUTION: the tool and stop the application that caused Always be sure that the tool is switched off and the •...
stop the tool and slide to your desired position. NOTE: CAUTION: Use a dry cloth to wipe the dirt off the lens of lamp. • Be careful not to scratch the lens of lamp, or it Always set the speed change lever fully to the •...
The fastening torque is minimum when the number 1 is Installing bit holder aligned with the pointer, and maximum when the marking is aligned with the pointer. The clutch will slip at 1. Bit holder various torque levels when set at the number 1 to 16. 2.
When driving wood screws, predrill pilot holes to • MAINTENANCE make driving easier and to prevent splitting of the workpiece. See the chart. CAUTION: Nominal diameter of wood screw Recommended size of pilot hole Always be sure that the tool is switched off and the •...
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Screw bits • Hook •...