Advertisement
t F -
t
i
Such data as date, discount/premium and percentage should be preset before attempting registration
operations. These preset data are printed automatically on the receipt or journal, and cdn be recalled
during registration by simply pressing the corresponding function key. Presetting data will supersede
any data previously preset.
o Memory data (Registration records, Preset data) are retained as long as the power cord is plugged
into an AC outlet (except during power failures) even when the mode switch is set to the OFF po-
sition.
Reprogramming of all memory data is required whenever power supply to the ECR is interrupted bv
unplugging the power cord, power failures, etc.
A rechargeable power protection battery pack (Model B-11, optional) is available to protect data and
allow operations when regular power supply is interrupted (see page 2g).,
o The MODE SWITCH must be set to either X or Z 1or prograrn mode 1 or 2 depending upon
the type
of data to be preset.
o Press tt'"
@-!"y
*hile the MODE SWITCH is set to either X or Ztoenter the programming mode.
Ensure that lFo.ool is being shown on the display at this time.
o Pressing tne fffi,| key is not required after each individual data entry. The
lffi,l key MUSL however.
be pressed after all programming is complete in a particular rnode (programTor 2), except for date
and tax table entries.
El PROGRAMMTNG
1) PRESETTING DATE
Presetting the date is required
M O D E
SWITCH
at the beginning of each new business day.
@-[TjTl_tpArE
I
8------*@_o
I
I
L_______O.Oigits must be entered for date, in sequence
ot year/month/day.
E x a m p l e : M a y 1 5 , 1 9 8 7 - 8 7 0 5 1 5
- 7 -
Advertisement
