Casio 140CR Manual

Electronic Cash Register
!
Before You Start
• Unpack the machine and
ensure the items illustrated
are enclosed. A set of keys
are provided each stamped
with an identifying letter for
each key type.
• The key labelled PGM moves to
every position on the mode lock.
• The key labelled OP moves to the
OFF, REG and CAL positions on
the mode lock.
1
Load The Memory Protection Batteries
• Remove the printer cover.
• Press the clip just behind the printer
paper inlet, and lift the battery
compartment cover off.
• Load three new AA batteries.
• Replace the battery compartment
cover.
2
Loading The Paper Roll
• Turn to the REG position. Install the supplied 58mm paper roll by placing
the paper roll into the printer well. Insert the paper into the inlet and press
FEED key to set the paper.
• The machine is set for journal printing as standard therefore attach the
paper to the take up reel provided, then slot the take up reel into indent
above the paper roll.
• Alternatively if the machine is to be set to receipt. Feed the paper through
the printer inlet and then through window of the printer cover.
(Follow option 4 to set the register for 'Receipt' rather than 'Journal' operation).
3
Initialise The Cash Register
• Insert the PGM key into the mode lock and turn to the PGM position.
• Enter date as DD MM YY (ie. 8 January 2010 = 080110).
• Enter time using the 24hr clock (ie. 4.00pm = 1600).
3 then SUBTOTAL then
• Press
2 2 then CASH then
• Press
• Turn the key to OFF, insert the OP key and turn back to REG for normal use.
Your Helpline Support Number is 01924 438238
'Select Option 2 for Support' The lines are open 8.30am - 4.30pm Monday-Friday
Printer Cover
Operator Display
Mode Switch
Mode Lock
CAL
Keyboard
REG
X
OFF Z Drawer
RF
PGM
Accessories
Roll Paper
Mode Keys
Drawer Keys
*Use this plate for tacking the notes received from the customer.
0 1 2 2
SUB
TOTAL
SUB
TOTAL
Model 140C Model 140CR
1pc
Users Manual
1set
Magnetic Plate*
2pcs
Important Notice
You must install the memory
protection batteries before
you can begin programming.
Once installed, initialise the
machine as explained in
Step 3.
Mode Lock
CAL
REG
OFF
RF
PGM
1pc
1pc
X
Z
PGM
C-A32