Advertisement
IMPORTANT
o L]ocAnoN
Do not locate the ECR near heaters, or in areas exposed to direct sunlight, humidi-
ty or dust. The ECR should be located on a flat, stable surface.
O POWER CORD
This ECR operates on standard household current l1OO, 117, 22O, 23O or 24QY
(50/60 Hz)). Never use an overloaded outlet, and be sure that the cord is located
where it will not be tripped over.
O MEMORY PROTECTION
Memory data (Registration records, Preset data) are retained as long as the power
cord is plugged into an AC outlet (except during power failures) even when the
MODE SWITCH is set to the OFF position. Note that all memory data are lost
whenever power supply to the ECR is interrupted by unplugging the power cord,
power failures, etc. (except when optional B-11 power protection battery is used).
O CLEANING
Use a soft cloth dipped in a mild detergent solution and wrung out to clean the
exterior of the ECR. Be sure to thoroughly wring the cloth to avoid damage to the
printer. Never use paint thinner, benzine or other volatile solvents.
- l -
\.:
% .
* - r - - l
Advertisement
