Panasonic KX-TD500 System Reference Manual page 1252

59.00 Tone Detection Mode (TDM)
Description
When Tone Detection for DISA/AGC is set to"Yes", the system disconnects the lines if it detects any
tones, regardless of tone type, during a DISA trunk-to-trunk call.
This command is used to select a type of tones which applies to Tone Detection for DISA/AGC.
For example, if "2:cyclic tone only" is selected, the system disconnects the lines only when it detects
cyclic tone during a DISA trunk-to-trunk call.
Input Format
D M
T
Mode ( SH/AT/BT)
Index Number
Index Number
01 to 48
Index Number Input Values
Assigning Item
Tone Detection Mode
(DISA/AGC)
Conditions
None
Index Number
Trunk Group Number
X (0,1 or 2)
0: all tones
1: no tone or cyclic tone
2: cyclic tone only
(Default = 0)
11-C-126
↵
CR
Explanation
Input Value