Attendant Console (2/3) - Panasonic KX-TD500 System Reference Manual

Description of Assigning Items
DN
TRS LV
PAG
Overflow
Night
Conditions
This screen cannot be selected if "System-Configuration", Slot Assignment has
no "ATLC" card programmed.
Tenant
When pressing the NEXT key, this screen changes as follows:
Attendant
Console
(1/3)
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen. The operation of function keys are described
in Section 8-I "Operation of Function Keys".
Assigns the Floating DN of the Attendant Console. This is used to call the
Attendant directly.
Assigns the toll restriction level for the Attendant Console.
Assigns the available Paging types for the Attendant Console. This can
be set to internal, external or all.
The types of External Paging are limited to those preset to "Yes" in the
System-Operation (1/3) screen. If Paging External Pagers 1 and 2 are
both preset to " No" in the screen, "—" appears on this item.
Assigns the destination of Overflow calls in the Day mode. Overflow
occurs when all the loop keys are active, another call arrives and one of
the calls has exceeded the time allowed for overflow. The calls are
queued at the overflow destination as well as the console.
Assigns the destination of the attendant-seeking calls (DPH, DID, DISA,
Extension) in the Night mode.
The tenant number which is settled by assigning the items "Operator 1, 2"
of the "System - Operation (3/3)" or "System - Tenant" screen. "–" is
displayed if the item "Tenant Service" of the "System - Operation (1/3)"
screen.
Attendant
Console
(2/3)
3 4 5
Attendant
Console
(3/3)
6 HRD CPY 7
10-G-33
8