Figure 9-8. Remove Transparent Cover (2); Figure 9-9. Assemble Nfc Flex - Motorola APX 3000 Detailed Service Manual

Hide thumbs Also See for APX 3000:

Table of Contents

Debugging Fixture: Debugging Fixture Set up

4. Turn to the bottom plane of the fixture, remove the transparent cover (2) and then assemble

the Extended Main flex (P/N: 0104055J18) on the fixture. Connect the connector that is on

the extended flex with the mating connector on the main flex in the front housing kit . Once

the flex is connected, screw back the transparent cover (2).

Main Flex in front

5. Fold the NFC Flex (P/N: 0104052J74) according to figure below. Assemble the NFC Flex on

the LED stick Module and secure the flex with a clip. Once the NFC Flex is assembled, the

fixture is ready to troubleshoot the board.

Extended Main Flex

(0104055J18)

Transparent cover (2)

Figure 9-8. Remove transparent cover (2)

(0104052J74)

LED stick Module