Motorola APX 3000 Detailed Service Manual page 139

Troubleshooting Charts: Bluetooth Failure – Pairing Issue
Bluetooth Failure – LCD Indication (Page 3)
6
Connect radio to PC and
read the codeplug
No
BT Audio Reroute
programmed in the
code plug?
No
Connect an audio
accessory (e.g. DRSM)
on the radio side
connector to check
whether the audio had
been re-routed to
different path.
No
PTT on headset
produces low -tone
from radio
No
Audio heard through
side connector
accessory without
headset paired ?
No
Go to RX Audio flowchart
(5.6 or External Speaker
Audio Out Failure)
Determine what button is
Yes
programmed for BT audio
re- route from the
codeplug and press it
Audio heard through
BT headset?
Power off the POD headset, then slightly
Yes
turn and press firmly on the earpiece
connector to ensure it is making good
connection to the POD. Power on the POD
headset and re-pair it with the APX radio.
Audio heard through
Yes
7
Yes
No
BT headset?
No
5-49
Resolved