Motorola ASTRO APX 3000 Quick Reference Card

m
®
ASTRO APX™ 3000
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Top Button*
_______________
On/Off Switch
Top Side Button*
______________
Middle Side
Button*
______________
Up Arrow
Button
____________
Down Arrow
Button
____________
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners. © 2012 and 2015 by Motorola Solutions, Inc. All Rights Reserved. 06/15.
1303 East Algonquin Road., Schaumburg, Illinois 60196, U.S.A.
Transmit/
Receive LED
Bluetooth
LED
Side
Connector
Cover
Antenna
IMPORTANT!
You must connect a speaker microphone,
earpiece or headset to hear the audio
indicators; and a GCAI DRSM to see the strings
and icons of your radio.
Turning Radio On/Off
• On – Push the On/Off Switch downwards. You
see a Green Dot.
• Off – Push the On/Off Switch upwards.
Control Buttons for Channels, Zone or
Volume
• Multi-Functional Button (MFB)* – To toggle
between Volume, Channel or Zone mode.
• Up Arrow Button – To increase volume; to
toggle the channels or zones up.
• Down Arrow Button – To decrease volume; to
Bluetooth
toggle the channels or zones down.
Pairing
Spot
* MFB can be programmed to Top, Top Side and
Middle Side button. It can be configured to
Battery
support two features out of Volume, Channel or
Zone mode.
Making a Call
1
Press the Multi-Functional Button* to the
desirable channel or zone mode.
2
Press the Up/Down Arrow Button to change
Battery
the channel/zone.
Connector
3
Adjust volume, if necessary.
4
Press the PTT button to transmit; release to
receive.
You may hear Channel Voice Announcement
upon entering channel or zone mode if
preprogrammed.
Sending an Emergency Alarm
1
Press and release the Emergency button**.
2
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
** Default timer of Emergency button press to
activate Emergency is 50 milliseconds. This
timer is programmable, see Emergency
Operation in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
*PMLN6407C*
PMLN6407C
English