Removing And Attaching The Accessory Connector Cover - Motorola SRX 2200 3.5 User Manual

2 Turn the antenna clockwise to attach to the radio.
3 To remove the antenna, turn the antenna
counterclockwise.
Note:
When removing the antenna, ensure that
the radio is turned off.
Removing and Attaching the Accessory
Connector Cover
The accessory connector is on the antenna side of
the radio. It is used to connect accessories to the
radio.
Note:
To prevent damage to the connector, shield it
with the connector cover when not in use.
1 To remove the accessory connector cover, rotate
the thumbscrew
disengages from the radio.
Note:
If the thumbscrew is too tight, use an Allen
wrench at
counterclockwise until it
to loosen it first.
English
23