Time And Language Settings; Changing The Date, Time, Or Time Zone - Honeywell Dolphin 75e User Manual

To update the terminal using an SD card:
1. Copy the provisional FFU image onto the root directory of the SD card. The file name must be Flash.ffu and be signed
by the OEM for the manual flash feature to recognize the image.
2. Install the SD card in the terminal.
3. Plug the terminal in an external power source. The terminal must have power for the entire flash process of it could
become unstable.
4. In the Apps list, touch Settings
5. If a valid Windows Embedded 8 Handheld Flash.ffu image is found on the SD card, a "Configuration received" message
appears under the SD Card heading.
6. Select SD Card to start flashing the terminal.
7. If you want to continue, select OK to confirm. All data on the terminal will be erased.
8. Select OK to verify the terminal is connected to a reliable power source.
A "Goodbye" message appears, and then the terminal reboots into flash mode. A lightning bolt appears on the screen
as the image is flashed onto the terminal. The flash process takes several minutes without a progress indicator. When
the process is finished, the terminal boots into out-of-box experience (OOBE) mode. A language selection screen
appears. For information on how to set up the unit from the OOBE mode, see
page 1-4.

Time and Language Settings

By default, the terminal is set to automatically update the time and date for your current location, when an active network
connection is available for syncing. You can turn Off automatic updating and manually change the date, time and the time zone
or switch the clock from to a 12-hour to a 24-hour clock format from the date + time settings screen.

Changing the Date, Time, or Time Zone

1. In the Apps list, touch Settings
2. Select date + time.
3. Turn the 24-hour clock format On
4. By default, the terminal is set to automatically update the time and date for your current location.
To manually set the date and time turn Off
date and time.
5. Touch the Time zone box and then select the new time zone.
> manual flash.
.
or Off . The default setting is Off.
the Set date and time automatically feature and then modify the
Power On and Set Up the Terminal on
5 - 11