Makita 6503D Instruction Manual page 5

Specific Safety Rules
USBO22~1
1.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact w i t h a "live" wire will
also make exposed metal parts of the tool "live" and shock the operator.
2.
Be aware that this tool is always in an operating condition, because it does
not have t o be plugged into an electrical outlet.
3. Always be sure you have a firm footing.
4. Be sure no one is below when using the tool in high locations.
5.
Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do
not leave the tool running. Operate the tool only when hand-held.
8. Do
not touch the drill bit or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SYMBOLS
The followings show the
symbols
used for tool.
v
.................................
volts
-
.................................
direct current
.................................
no load speed
n ,
.../
min
................................ revolutions or reciprocation per minute
____
5