Draytek Vigor2860 series Quick Start Manual page 13

Left
GigaLAN
LED
1~6
Right
LED
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB
VDSL/ADSL
WAN2 (Giga)
GigaLAN (1-6)
PWR
ON/OFF
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
Description
Press "Wireless LAN ON/OFF/WPS" button once to
wait for client device making network connection
through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to
enable (WLAN LED on) or disable (WLAN LED
off) wireless connection.
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
Connecter for a USB device (for 3G USB Modem or
printer).
Connecter for accessing the Internet.
Connecter for local network devices or modem for
accessing Internet.
Connecters for local network devices.
Connecter for a power adapter.
Power Switch.
5
Vigor2860 Series Quick Start Guide