Monitoring The Auto Update Process - Cisco PIX 500 Series Configuration Manual

Chapter 14 Configuring Failover
5.
6.
7.

Monitoring the Auto Update Process

You can use the debug auto-update client or debug fover cmd-exe commands to display the actions
performed during the Auto Update process. The following is sample output from the debug auto-update
client command.
Auto-update client: Sent DeviceDetails to /cgi-bin/dda.pl of server 192.168.0.21
Auto-update client: Processing UpdateInfo from server 192.168.0.21
Component: asdm, URL: http://192.168.0.21/asdm.bint, checksum:
0x94bced0261cc992ae710faf8d244cf32
Component: config, URL: http://192.168.0.21/config-rms.xml, checksum:
0x67358553572688a805a155af312f6898
Component: image, URL: http://192.168.0.21/cdisk73.bin, checksum:
0x6d091b43ce96243e29a62f2330139419
Auto-update client: need to update img, act: yes, stby yes
name
ciscoasa(config)# Auto-update client: update img on stby unit...
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 1, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 1001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 1501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 2001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 2501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 3001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 3501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 4001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 4501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 5001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 5501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 6001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 6501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 7001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 7501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 8001, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 8501, len = 1024
auto-update: Fover copyfile, seq = 4 type = 1, pseq = 9001, len = 1024
OL-12172-03
If only the primary (active) unit has new image, the secondary unit becomes the active unit, and
e.
the primary unit reloads.
The update process starts again at step 1.
f.
If the security appliance determines that the ASDM file needs to be updated for either the primary
or secondary unit, the following occurs:
The primary unit retrieves the ASDM image file from the HTTP server using the URL provided
a.
by the Auto Update Server.
The primary unit copies the ASDM image to the standby unit, if needed.
b.
The primary unit updates the ASDM image on itself.
c.
The update process starts again at step 1.
d.
If the primary unit determines that the configuration needs to be updated, the following occurs:
a. The primary unit retrieves the configuration file from the using the specified URL.
b. The new configuration replaces the old configuration on both units simultaneously.
c. The update process begins again at step 1.
If the checksums match for all image and configuration files, no updates are required. The process
ends until the next poll time.
Auto Update Server Support in Failover Configurations
Cisco Security Appliance Command Line Configuration Guide
14-55