Translating The Language Of User Messages - Cisco PIX 500 Series Configuration Manual

Chapter 37 Configuring Clientless SSL VPN
Table 37-10 Remote System Configuration and End User Requirements for Clientless SSL VPN (continued)
Task
Using E-mail
via Application Access
Using E-mail via
Web Access
Using E-mail via
E-mail Proxy

Translating the Language of User Messages

The security appliance provides language translation for the portal and screens displayed to users that
initiate browser-based, clientless SSL VPN connections, as well as the interface displayed to Cisco
AnyConnect VPN Client users.
This section describes how to configure the security appliance to translate these user messages and
includes the following sections:
•
•
OL-12172-03
Remote System or End User Requirements
Fulfill requirements for Application Access
(See Using Applications)
If you are using an IMAP client and you lose your mail server connection or are unable to
Note
make a new connection, close the IMAP application and restart clientless SSL VPN.
Other mail clients
Web-based e-mail product installed
SSL-enabled mail application installed
Do not set the security appliance SSL version
to TLSv1 Only. Outlook and Outlook
Express do not support TLS.
Mail application configured
Understanding Language Translation, page 37-74
Creating Translation Tables, page 37-75
Specifications or Use Suggestions
To use mail, start Application Access from the
clientless SSL VPN Home page. The mail client is
then available for use.
We have tested Microsoft Outlook Express
versions 5.5 and 6.0.
Clientless SSL VPN should support other SMTPS,
POP3S, or IMAP4S e-mail programs via port
forwarding, such as Netscape Mail, Lotus Notes,
and Eudora, but we have not verified them.
Supported:
Outlook Web Access
•
For best results, use OWA on Internet
Explorer 6.x or higher, Mozilla 1.7, or
Firefox 1.x.
• Lotus iNotes
Other web-based e-mail products should also
work, but we have not verified them.
Supported mail applications:
Microsoft Outlook
•
Microsoft Outlook Express versions 5.5 and
•
6.0
Netscape Mail version 7
•
Eudora 4.2 for Windows 2000
•
Other SSL-enabled mail clients should also work,
but we have not verified them.
See instructions and examples for your mail
application in "Using E-Mail over Clientless SSL
VPN."
Cisco Security Appliance Command Line Configuration Guide
Clientless SSL VPN End User Setup
37-73