Enabling Additional Anyconnect Client Features - Cisco PIX 500 Series Configuration Manual

Chapter 38 Configuring AnyConnect VPN Client Connections
After the file is loaded into cache memory, the profile is available to group policies and username
attributes of client users.
In the following example, the user previously created two new profile files (sales_hosts.xml and
engineering_hosts.xml) from the AnyConnectProfile.tmpl file provided in the client installation and
uploaded them to flash memory. Then the user specifies these files as profiles for use by group policies,
specifying the names sales and engineering:
asa1(config-webvpn)# svc profiles sales disk0:/sales_hosts.xml
asa1(config-webvpn)# svc profiles engineering disk0:/engineering_hosts.xml
Entering the dir cache:stc/profiles command shows the profiles loaded into cache memory:
hostname(config-webvpn)# dir cache:/stc/profiles
Directory of cache:stc/profiles/
0
0
2428928 bytes total (18219008 bytes free)
hostname(config-webvpn)#
Enter group policy webvpn or username attributes webvpn configuration mode and specify a profile for
Step 4
the group or user with the svc profiles command:
In the following example, the user follows the svc profiles value command with a question mark (?)
view the available profiles. Then the user configures the group policy to use the profile sales:
asa1(config-group-webvpn)# svc profiles value ?
config-group-webvpn mode commands/options:
Available configured profile packages:
engineering
sales
asa1(config-group-webvpn)# svc profiles sales
asa1(config-group-webvpn)#

Enabling Additional AnyConnect Client Features

To minimize download time, the client only requests downloads (from the security appliance) of the core
modules that it needs. As additional features become available for the AnyConnect client, you need to
update the remote clients in order for them to use the features.
To enable new features, you must specify the new module names using the svc modules command from
group policy webvpn or username webvpn configuration mode:
Separate multiple strings with commas.
For a list of values to enter for each client feature, see the release notes for the
Cisco AnyConnect VPN Client.
OL-12172-03
[no] svc profiles name path}
---- 774 11:54:41 Nov 22 2006
---- 774 11:54:29 Nov 22 2006
[no] svc profiles {value profile | none}
[no] svc modules {none | value string}
Enabling Additional AnyConnect Client Features
engineering.xml
sales.xml
Cisco Security Appliance Command Line Configuration Guide
38-9