Operation; Maintenance - Makita VC3211M Instruction Manual

013379
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.

OPERATION

WARNING:
Always use a P2-respirator.
•
CAUTION:
If foam or liquid escapes from the tool, switch off
•
immediately. Continuing to using in this condition
may cause an electric shock and breakage of the
cleaner.

MAINTENANCE

WARNING:
Always use a P2-respirator during performing
•
maintenance.
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
A technical inspection, including inspection of
•
filters, air tightness, and control mechanism, must
be performed at least once a year by an instructed
person.
During maintenance, all contaminated items which
•
cannot be satisfactorily cleaned must be disposed.
Such items must be disposed of in impervious
hags which accord with your country's regulations.
After the operation in the hazardous area, the
•
outside of the tool must be decontaminated by
vacuum cleaning methods and wiped clean or
treated with sealant before you take the tool out of
a hazardous area. All the parts of the tool must be
regarded as contaminated when removed from the
hazardous area, and appropriate action must be
taken to prevent dust dispersal.
Change the air filter when the air filter is clogged
•
with dust or
performance declined.
you feel that the
Check the filters periodically. If there is a tear on it,
•
replace it immediately.
Removing the air filter
CAUTION:
Wait for about 5 minutes so that dust in the tank
•
completely settles down.
Make sure that the tool is unplugged.
•
Be careful not to let the dust enter inside the tank
•
cover when removing the air filter.
013389
Unhook the tank cover and remove it carefully. Put it up
side down.
013390
Unlock the filter hooks by flipping the stopper lever.
013391
Cover the air filters with a plastic bag.
cleaner's
013392
9
1. Stopper lever
1
1. Stopper lever
1