Secton 1 - Product Overvew
COMPONENT
DESCRIPTION
Drive LED
The LED will be solid BLUE when drive is connected but inactive. The LED will blink when the
drive is being accessed, formatted or synchronized. The LED will be solid GREEN when the
remaining capacity of the drive is less than 5%. It will illuminate RED if the drive has failed.
Power Button
Push in to power-on the DNS-313. The edges of the button will be illuminated with BLUE back
lighting when the device is powered on. Press again to turn off. There is a few seconds delay
during both power on and power off.
Activity LED
The Activity LED will be solid BLUE when there is an Ethernet connection. It will blink to indicate
LAN traffic.
D-Lnk DNS-313 User Manual
Hardware Overvew
Front Panel
Drive LED
Power Button
Activity LED
4