Lan Setup - D-Link DNS-313 User Manual

Secton 3 - Configuraton

LAN Setup

The LAN Settings menu is used to configure IP settings
and DHCP client status of the network storage device.
The default IP settings for the DNS-313 are initially as a
DHCP Client. However, if no DHCP server is detected, the
device will default to a Static IP address (192.168.0.32).
When the DNS-313 is in DHCP Client mode, no further IP
settings configuration is necessary. If the device requires
use of DNS service, DNS server IP addresses can be
entered in the DNS1 and DNS2 entry fields.
If a Static IP address is preferable, change the IP address
and subnet mask to suit your network.
The LAN Settings menu is also used enable or disable the
LLTD (Link Layer Topology Discovery) responder setting.
This is used to provide information to network topology
display monitors such as included with Windows Vista.
Click on the Save Settings button to apply and save
the new settings. If you are change the IP address or
DHCP client status of the device, it will be necessary
to log in again using the new IP address. If you do not
know the new address (as would likely be the case when
changing from a static IP address to DHCP client) use
the Easy Search Utility on the Installation CD to learn the
IP address of the device.
D-Lnk DNS-313 User Manual 25