Setup UtLTEs - D-Link DNS-313 User Manual

Secton 3 - Configuraton
The Setup Utility on the Installation CD is used for first time setup of the DNS-313 or, after the hard disk has been
formatted, use the Setup Utilities to establish a configure IP settings and map the drive to your Windows computer.
To use the Click n' Connect utility for initial setup, insert the Installation CD into your computer's CD-ROM drive and
follow the instructions in the next section. After inserting the CD, the menu below should appear on the desktop after
a few seconds. In addition to Click n' Connection Quick Installation, use this menu to launch the Easy Search Utility or
any of the options listed in the bullet list in the right side panel.
The Click n' Connect utility will walk you through the complete installation including inserting a SATA hard drive, formatting
the disk and mapping the drive to your computer. The Easy Search Utility can be used to establish IP settings, and
later to map the network drive to your computer. The Easy Search Utility cannot be used with an unformatted hard
drive, so use Click n' Connect for initial setup, then use Easy Search on any computer that will be using the network
storage drive.
D-Lnk DNS-313 User Manual

Setup Utltes

9