D-Link DVG-5121SP User Manual page 57

Voip telephone adapter

Hide thumbs Also See for DVG-5121SP:

Table of Contents

VoIP Setting

DVG-5121SP User's Manual

Caller ID Type 1 Alerting Signal- Select alerting signal type to device 1.

Caller ID Type 2 Alerting Signal- Select alerting signal type to device 2.

Ring Impedance- Select ring impedance base on local settings. Pls contact to ISP.

Hook Flash Detect Upper Bound- Set Hook Flash Detect upper bound. Normally will under 1000 msec.

Hook Flash Detect Lower Bound- Set Hook Flash Detect lower bound. Normally will over 100 msec or above.

Voice Tx Level- voice hearing volume setting level control, default power level setting from 3~ 6.

Voice Rx Level- voice listening volume setting level control, default power level setting from 3~ 6.

D-Link Corporation

Table of Contents