Quick Installation Guide DVG-5102S VoIP Telephone Adapter Check Your Package Contents DVG-5102S Ether CAT5 UTP) 12VDC, 1A Power VoIP TA Cable Adapter Using a power adapter with a different voltage rating will damage this product and void the warranty.
Hardware Overview Front Panel Power Indicator: Solid green light indicates a normal power supply. Alarm Indicator: Red light indicates abnormal status, such as failed to register or provision or not obtained IP address. Register Indicator: The Register LED will turn on when the VoIP Router is connected to a VoIP service provider.
Hardware Overview (continued) Rear Panel Phone : Connect to your phones using standard phone cabling (RJ- 11). WAN: Connect to your broadband modem or router using an Ethernet cable. LAN: Connect to your Ethernet enabled computers using Ethernet cabling. Power receptor: Receptor for the provided power adapter. Reset Button: Press this button to restore factory default settings.
Installing the Hardware A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the DVG-5102S and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Page 5
D. Connect the power adapter to the power input at the back panel of the DVG-5102S and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn on to indicate proper operation.
Page 6
Installing the Hardware (continued) After the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your VoIP service is already activated, you can make phone calls now.
Page 7
*Statics IP: 192.168.8.XXX, the “XXX” can be any number from 1~253 except 254 cannot be used* If the DVG-5102S is connected behind a router, the IP address of the router is determine by the router’s DHCP Server. Open your Web browser and type http://192.168.8.254 into...
Page 8
Configuration (continued) The username of USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure at “Maintenance Device Management User”. Click “Apply” “Save and Reboot” Select your Internet connection type: DHCP –...
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within Singapore: D-Link Technical Support over the Telephone: Service Centre Hotline: (65) 6774 6233 [Press 1] 24x7 Technical Support Hotline: (65) 6501 4200 D-Link Technical Support over the Internet: www.dlink.com.sg/support/...