D-Link DVG-5121SP User Manual page 55

VoIP Setting
line to receive any inbound calls, the function can be disabled. Users can also use the Up or
Down key to adjust hunting priority.
Call hunting timeout- The call repeat timeout can be set if user choose call hunting group function enabled. Default
is: 30 seconds.
Call repeat timeout- Set call repeat timeout value to setting.. Default is: 10 seconds.
Call transfer- Enable the call transfer function on the specific phone port.
Call forward- Enable the call forward function on the specific phone port.
Call Forward Always Number- Enter the Forward Always Number for an automatic dialing function.
Call Forward on Busy Number- Enter the Forward on Busy Number for an automatic dialing function.
Call Forward on NoAnswer Number- Enter the Forward on No Answer Number for an automatic dialing
function.
Call Forward on NoAnswer Timeout- Enter the Forward on NoAnswer Timeout value to setting. Default: 30
seconds.
Do not disturb- Select Enabled or Disabled. Default is: Disable.
Hotline Functions- Phone port: When the user picks up the phone, the VoIP telephone adapter automatically dials
your assigned hotline number. When in hotline mode, other lines cannot be used.
Hot Line Number- Enter the hot line number for an automatic dialing function.
Repeat Call on Busy- Select Enabled or Disabled. Default is: Disable.
55
DVG-5121SP User's Manual
D-Link Corporation