3-10 Windows Setup and Operation
Synchronization completed
Source disk
Destination disk
RDR Virtual Disk
IMPORTANT:
When a new partition is created on the disk where RDR is configured, the created
partition area is synchronized automatically.
When the system is halted without shutting down Windows properly, for example, by
pressing the power button, the entire area of the synchronized disks will be
resynchronized after the system is restarted.
DISK ACCESS
LED
Green
(Blinking)
Green
(Blinking)
RDR Utility
Op State: State
Duplex
Duplex
Duplex
Status
None