Installing and Using Utilities 5-97
Configuring Remote Desktop Connection
In the setup window of Remote Desktop Connection, enable the remote connection. For more
information, see the Windows online Help.
If the remote connection is not enabled, the Production Side with Remote Desktop Connection
cannot access the Upgrade Side in split mode.
Configuring Remote KVM Console
Configure Remote KVM Console function.
Refer to [Remote Management Function] in [Chapter 4. System Configuration].
IMPORTANT:
On Active Upgrade, Remote KVM Console function is used in order to display the console of the
Upgrade side on the Production Side during Split status.
You need to execute [Server Initial Configuration] and [Managing PC Configuration] in [Chapter
4. System Configuration]-[Remote Management Function] for this server.
Preparing an IP address to assign to the Upgrade Side
Prepare one IP address that meets the conditions below for Active Upgrade. You need this IP
address to connect to the Upgrade side with Ethernet PCI Adapter while split.
– A network address that is the same as the one assigned to the Ethernet team
– An unassigned, unused IP address
For how to configure IP address, see "Setting the IP address for the Upgrade Side System."