NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 341

Windows Automatic Updates
If you are using Windows Automatic Updates, and you previously downloaded all of the required
software updates, the Automatic Updates icon should be present in the system tray, and it should
report that updates are ready for your computer (see the figure below). If so, you are ready to apply
the updates.
Automatic Updates Icon in System Tray
IMPORTANT:
Before installing any software, ensure that you are working on the Upgrade Side desktop
(through a remote connection). Do not install software on the Production Side.
To apply the downloaded updates
1. Click on the Automatic Updates icon in the Upgrade Side system tray to display the
Automatic Updates dialog box.
2. Select the radio button for Custom Install and click Next.
The next page displays a list of the updates you downloaded and allows you to select which
ones will be installed at this time.
3. Select only the updates that you previously checked for compatibility with your NEC
Express5800/ft series system, then click Install.
During the installation process, the Automatic Updates dialog box minimizes to the system tray.
When the installation is complete, you can display the dialog box again. It should report that all
updates were successfully installed.
Some updates might require you to restart the operating system on the Upgrade Side. You can click
Restart Now to allow Automatic Updates to restart the Upgrade Side automatically, or you can
manually restart later. You can restart the Upgrade Side as many times as necessary to complete the
installation.
See "Restarting the Upgrade Side" on page 5-145 for information about reconnecting to
the Upgrade Side after you restart it.
Installing and Using Utilities 5-143