NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 447

3.
Hold the stopper, and disconnect the power cable of the module to be removed.
The stopper will return to the vertical position when you release it.
CHECK:
Leave your hands and make sure that the stopper returned to the vertical position. If you
disconnect the cable and the stopper does not go back to this position, you cannot pull out the
CPU/IO module in the next step.
4.
Loosen the screws securing the CPU/IO module handle to press down the handle.
IMPORTANT:
Before you pull out a CPU/IO module, check the rear of the server to make sure cables for
connection with peripheral equipment or network are disconnected. If any cables are
connected, keep a record of where the cables are connected and disconnect all cables
connected to the module you are to pull out.
TIPS:
If you cannot disconnect the LAN cable easily, disconnect while pressing the latch with a
slotted screwdriver.
Stopper
System Upgrade 8-13