Panasonic KX-TDA100 Features Manual page 729

Value Range
DIL: Distribution depends on the CO line through which the calls arrive
DID: Distribution depends on the DID number of the calls
Programming Guide References
None
Feature Guide References
1.1.1.1 Incoming CO Line Call Features—OVERVIEW
DID/TIE—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DID distribution
or for TIE line service.
Default
0
Value Range
0–15
Programming Guide References
None
Feature Guide References
1.1.1.3 Direct Inward Dialing (DID)
1.27.1.2 PBX Code Method (Access with PBX Code)
1.27.1.3 Extension Number Method (Access without PBX Code)
DID/TIE—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for DID
distribution or for TIE line service.
Default
Not stored.
Value Range
Max. 8 digits (consisting of 0–9)
Programming Guide References
None
Feature Guide References
1.1.1.3 Direct Inward Dialing (DID)
1.27.1.2 PBX Code Method (Access with PBX Code)
1.27.1.3 Extension Number Method (Access without PBX Code)
4.16 CO & Incoming Call [10]
Feature Guide 729