Leading Number [8-2] - Panasonic KX-TDA100 Features Manual

4.14 ARS [8]

4.14.2 Leading Number [8-2]

Specifies the area codes and/or telephone numbers as leading numbers that will be routed by the ARS
feature. A maximum of 1000 different leading numbers can be programmed, and each leading number can
select a Routing Plan Table number, which determines the ARS procedure.
Each leading number can also specify the additional (remaining) number of digits. The additional
(remaining) number of digits must be specified only when "#", for example, is needed after the dialed
number. The "#" will be added after the programmed number of digits of the user-dialed number (excluding
the leading number).
Leading Number
Specifies the leading number.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and X)
Note
"X" can be used as a wild card character which substitutes any digit in its position.
Programming Guide References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Additional Number of Digits
Specifies the additional (remaining) number of digits following each leading number.
Default
0
Value Range
0–15
Programming Guide References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Routing Plan Number
Specifies the Routing Plan Table number used for each leading number.
712 Feature Guide