Default
Not stored.
Value Range
Max. 20 characters
Programming Guide References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
CO Line Access Number + Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
Programming Guide References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number
are routed. If a Caller ID Modification Table is being used, the modified number must match the telephone
number above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming Guide References
4.16.2 DIL Table & Port Setting [10-2]—CLI for DIL—CLI Ring for DIL—Day, Lunch, Break, Night
4.16.3 DID Table [10-3]—CLI Ring for DID—Day, Lunch, Break, Night
4.12 Feature [6]
Feature Guide
695