1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Feature References
1.18.1 Fixed Buttons
1.18.2 Flexible Buttons
Operation References
3.1.2 Settings on the Programming Mode
1.3.1.2
Call Forwarding (FWD)
Description
Extensions and incoming call distribution (ICD) groups can forward their calls to preset destinations. There
are four Call Forwarding (FWD) modes, described below.
Mode
All Calls
Busy
No Answer
Busy/No Answer
Depending on the type of incoming call (intercom or CO line call), it is possible to set different destination
for each.
54
Feature Guide
All calls are forwarded.
Follow Me: When an extension user fails to set this feature before leaving
the desk, this feature can be set from the destination extension.
Calls are forwarded when the extension user's line is busy.
Calls are forwarded when the extension user does not answer within a
preprogrammed time (→ Call Forwarding—No Answer Time [605]).
Calls are forwarded when the extension user's line is busy or the user does
not answer within a preprogrammed time (→ Call Forwarding—No Answer
Time [605]).
Description