Hitachi CHROMASTER 5160 Instruction Manual page 715

5. Assembling
5.1 System Power Supply
NOTE: It is not permitted for the user to carry out
installation at the time of delivery. For ensuring
safety and high accuracy in operation of the
instrument, installation of the instrument shall be
carried out by or under supervision of qualified
service personnel of the manufacturer or its
authorized service agent.
For the Chromaster series, the organizer unit has been prepared.
To the organizer (available at option), one Chromaster 5110
pump, one Chromaster 5210 autosampler, one Chromaster
5410/5420/5430/5450 detector and one IFC board can be
connected. For the Chromaster 5310 column oven and
Chromaster 5440 fluorescence detector, the power cord needs
to be connected to the column oven unit. If a single organizer is
inadequate due to use of 2 detectors, for example, an AC
adapter (option) that matches the detector concerned needs to
be used.
Connect the power cable from the organizer or AC adapter to the
power connector at the rear left of the detector.
Detector rear
panel side
Appended Fig. 1-3 e-Line Connector and Power Connector
APPENDIX 1 - 8
e-Line connector
Power connector
Positions