Parameter Input Method - Hitachi CHROMASTER 5160 Instruction Manual

3.1.2 Parameter Input Method

NOTE: The time for the instrument to stabilize varies with
the measurement conditions. Secure a warm-up
time depending on the conditions.
(Reference warm-up time: About 1 hour)
NOTE: Temperature of the thermostatic flow cell varies
with the set time (measuring conditions). If pump
flow velocity or oven temperature is changed,
provide a warmup time in accordance with
measuring conditions (reference: about 30
minutes).
(1) Display Contents of Screen
Explained here are display contents of the parameter input
screen and program setup screen.
(a) Input of a single numeral
Parameter name
PROGRAM NO. (1-9)
1
Input part
(b) Input of plural numerals
Parameter name
LAMP CHANGE (MM, DD, YYYY)
<1-12>
Input range
(c) Selection of numeral
Parameter name
TIME CONSTANT (0.01 s=1, 0.02 s=2, 0.05 s=3, 0.1 s=4
6
Input part
3 - 5
Input range
Input item
_
Input part
Selectable values
0.5 s=5, 1.0 s=6, 2.0 s=7)
3.1.2