How Can I Add Devices Accessed Through The Ecc800-Pro Com Port To The Ecc800-Pro Webui - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
4.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800-Pro WebUI, and drag the device to the
corresponding position in the Smart Module View pane based on the actual
device layout.
8.29 How Can I Add Devices Accessed Through the
ECC800-Pro COM Port to the ECC800-Pro WebUI?
Prerequisites
This section uses the device connecting to the COM1 port on the ECC800-Pro as
an example.
Context
Figure 8-31 Networking scenario
Procedure
Step 1 Set communications parameters on the device.
Table 8-45 Description of communications parameters to be set on a device
Parameter
Baud rate
Issue 04 (2021-10-09)
Choose Monitoring > System > ETH Converter Group > ETH Converter n >
Running Parameters and set Device name to ETH Converter n_Device
name.
Copyright © Huawei Technologies Co., Ltd.
Recommended Value
This section uses 9600 as an example. Set this
parameter based on site requirements.
NOTE
For certain devices, this parameter does not need to be set.
8 FAQ
372