Huawei SmartDC V100R021C10 User Manual page 341

Data center controller
Hide thumbs Also See for SmartDC V100R021C10:
Table of Contents

Advertisement

ECC800 Data Center Controller
User Manual
Step 2 Add a NetCol5000-C030.
1.
2.
3.
Step 3 Set the running parameters and control parameters for the NetCol5000-C030 on
the WebUI.
1.
2.
3.
4.
Issue 04 (2021-10-09)
Log in to the ECC800-Pro WebUI as an administrator.
Add a NetCol5000-C030.
Table 8-18 Adding a NetCol5000-C030
Path
Parameter
Choose
Device
System
attribute
Settings >
Device Type
Device
Management
and click Add
Connect To
Device. The
parameters
for adding
Communicati
devices are
ons Port
displayed.
Device
Address
Click Test Connect to check whether the NetCol5000-C030 connects to the
ECC800-Pro properly.
If the NetCol5000-C030 connects to the ECC800-Pro successfully, click
Confirm. The connected devices are displayed in the Number of
connected devices list.
If the connection fails, check whether the NetCol5000-C030 is properly
connected to the ECC800-Pro, whether the NetCol5000-C030 and
ECC800-Pro are running properly, and whether the parameter settings are
consistent with the NetCol5000-C030 parameters.
Log in to the ECC800-Pro WebUI as an administrator.
Choose Monitoring > Cooling > NetCol5000-C0301.
NO TE
1 in NetCol5000-C0301 is variable and subject to change with the smart cooling
product model and connection sequence. The displayed value prevails.
On the Running Parameters tab page, set smart cooling product running
parameters.
On the Controls tab page, set the smart cooling product control parameters
(such as on/off control parameters).
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Air Conditioner from the drop-
down list box.
Select NetCol5000-C from the drop-down
list box.
Select ECC800 from the drop-down list
box.
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the
NetCol5000-C is connected to the COM1 port
on the ECC800-Pro. If the NetCol5000-C is
connected to another port, select the number of
the connected port.
In this example, Device Address is set to 1.
During actual configuration, set the device
address for the NetCol5000-C based on the
actual situation.
8 FAQ
329

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecc800

Table of Contents