Setting Parameters On The Vcn Ivs Client - Huawei SmartDC V100R021C10 User Manual

ECC800 Data Center Controller
User Manual
4.
5.
----End
Follow-up Procedure
●
●
●
●

6.5.5.4 Setting Parameters on the VCN IVS Client

Prerequisites
The network communication between the VCN and the camera is normal.
Procedure
Step 1 Install the VCN IVS client.
1.
Issue 04 (2021-10-09)
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
The VCN automatically restarts after the IP address is modified. The restart
takes about 5 minutes. After the restart, use the new IP address to access the
VCN.
Change the PC IP address to an address in the network segment of the new
VCN IP address, enter the VCN IP address in the address box of the Internet
browser, and log in to the OMU Portal system.
(Optional) Set up a VCN stack. For details, log in to the https://
e.huawei.com/, search for the VCN product documentation, open the
documentation, and see the section (Optional) Deploying IVS in Stack
Mode.
(Optional) Create a VCN cluster. For details, log in to the https://
e.huawei.com/, search for the VCN product documentation, open the
documentation, and see the section (Optional) Deploying MPUs in Cluster
Mode.
NO TE
For the VCN500, search for VCN500 Product Documentation. For the
VCN510&VCN520&VCN540, search for VCN510&VCN520&VCN540 Product
Documentation.
Download the VCN IVS client.
You can obtain the VCN IVS in either of the following ways:
Method 1: Obtain the HW_IVS_Client.exe file from the software CD-ROM
delivered with the VCN.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
197