Siemens SINUMERIK 840D sl Series Diagnostics Manual page 615

08/2005
129912
%1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10].
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: Machine data LINKITEM_MN_MM_PROTOC_NUM_ETPD_STD_LIST[1,10] of the spec-
ified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129913
%1: Unable to determine machine data
$MN_MM_PROTOC_NUM_ETPD_OEM_LIST[1,10].
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: Machine data LINKITEM_MN_MM_PROTOC_NUM_ETPD_OEM_LIST[1,10] of the
specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129914
%1: Unable to determine channel-specific machine data.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
Definitions: The channel-specific machine data of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129915
%1: Unable to determine active user for channel %2.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Channel number
Definitions: The ?active user? of the specified channel of the specified NCU could not be determined.
Remedy: Connect to the NCU and restart the PCU if required.
129930
%1: Min. %2 log files are required for the requested time determination
($MN_MM_PROTOC_NUM_FILES[%3])
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Number of log files required
%3 = User index
Definitions: Time measuring of the configured workpiece requires at least the specified number of log
files.
Remedy: Set general machine data $MN_MM_PROTOC_NUM_FILES[%3] of NCU %1 to value
%2.
129931
%1: Min. %2 ETPD lists are required for the requested time determination
($MN_MM_PROTOC_NUM_ETPD_STD_LIST[%3])
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Number of ETPD lists required
%3 = User index
Definitions: Time measuring of the configured workpiece requires at least the specified number of
ETPD lists.
Remedy: Set general machine data $MN_MM_PROTOC_NUM_ETPD_STD_LIST[%3] of NCU %1
to value %2.
129932
DAT: The configured NCU (%1) for part program %2 in channel %3 is invalid.
Parameters: %1 = Name of the NCU according to NETNAMES.INI
%2 = Name of the part program
%3 = Channel number
Definitions: The specified combination of NCU, part program and channel is invalid for time measur-
ing of the configured workpiece.
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Overview of Alarms
2-615