Installation/mounting
5.10 Mounting a POM4320 power output module
5.10.1.2
Adjusting the busbar adapter
Tool
You need a Phillips screwdriver, size 0.6 x 3.5 mm.
Adjusting the busbar adapter to the thickness of the busbar
The busbar adapter of the POM can be adjusted for the following busbar thicknesses:
● 5 mm (delivery state)
● 10 mm
On the busbar adapter of the POM, there are four fastening blocks, which you can use to
adjust the busbar adapter to the rail thickness. The following figure shows the position of the
fastening blocks.
POM busbar adapter
64
Fastening block set to 5 mm
Fastening block set to 10 mm
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006