Siemens SIPLUS HCS Series Operating Instructions Manual page 238

Technical specifications
13.5 Technical specifications for I/O module
Article number
Output current
for signal "1" permissible range, max.
•
Connection method
Design of electrical connection at the digital
•
outputs
– Connectable conductor cross-sections,
solid
– Connectable conductor cross-sections,
finely stranded with wire end pro-
cessing
– Connectable conductor cross-sections
for AWG cables
Design of electrical connection for control
•
supply voltage
– Connectable conductor cross-sections
with wire end processing
– Connectable conductor cross-sections
for AWG cables
Interfaces
Interfaces/bus type
Interrupts/diagnostics/status information
Number of status displays
LED status display
Potential separation
between outputs and system interface
Isolation
Overvoltage category
Degree of pollution
EMC
EMC interference emission
Electrostatic discharge acc. to IEC 61000-4-2
Field-related interference acc. to IEC 61000-4-
3
Conducted interference due to burst acc. to
IEC 61000-4-4
Conducted interference due to surge acc. to
IEC 61000-4-5
Conducted interference due to high-frequency
radiation acc. to IEC 61000-4-6
Degree and class of protection
IP degree of protection
236
6BK1900-0BA00-0AA0
500 mA
2x 18 pole connector with spring-loaded connec-
tion
1x (0.2 ... 1.5 mm²)
1x (0.25 ... 1.5 mm²)
1x (24 ... 16)
2x 18 pole connector with spring-loaded connec-
tion
1x (0.25 ... 1.5 mm²)
1x (24 ... 16)
system interface
18
LED green = Ready, LED red = Error display, 1
LED yellow per output: LED on - H status; LED
off -L status
Yes
III
2
Limit value in accordance with IEC 61000-6-
4:2007 + A1:2011
4 kV contact discharge / 8 kV air discharge
10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0
GHz), 1 V/m (2.0 ... 2.7 GHz)
2 kV signal lines
DC supply cables: 0.5 kV balanced and unbal-
anced
10 V (0.15 ... 80 MHz)
IP20
Operating Instructions, 07/2019, A5E35066204A/006
SIPLUS HCS4200 PROFINET/PROFIBUS DP