Process and system messages, error handling
11.2 Power Output Module (POM)
11.2
Power Output Module (POM)
11.2.1
LED operating display for POM
The device has 3 LEDs on the front: The LEDs provide information about the operating state
of the device or system.
Meaning of LEDs
READY
green
Channel error
11.2.2
Fault reporting through diagnostics data
The internal monitoring functions (Page 150) recognize specific faults in the Power Output
Module. The corresponding information is provided in the diagnostics data.
180
HEATING ON
ERROR
yellow
red
Description
red
LED x off: Channel x is OK
LED x on: Channel x error
Description
Power OFF, device switched off
Initialization: The LED flashes until the device has been detect-
ed and addressed by the CIM.
Device is ready
Heating "ON"
A general fault has occurred, e.g. communication, line voltage,
temperature
SIPLUS HCS4200 PROFINET/PROFIBUS DP
Operating Instructions, 07/2019, A5E35066204A/006