Siemens SIPLUS HCS Series Operating Instructions Manual page 185

Article number
Output current
•
Connection method
•
•
Interfaces
Interfaces/bus type
Interrupts/diagnostics/status information
Number of status displays
LED status display
Potential separation
between outputs and system interface
Isolation
Overvoltage category
Degree of pollution
EMC
EMC interference emission
Electrostatic discharge acc. to IEC 61000-4-2
Field-related interference acc. to IEC 61000-4-
3
Conducted interference due to burst acc. to
IEC 61000-4-4
Conducted interference due to surge acc. to
IEC 61000-4-5
Conducted interference due to high-frequency
radiation acc. to IEC 61000-4-6
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
for signal "1" permissible range, max.
Design of electrical connection at the digital
outputs
– Connectable conductor cross-sections,
solid
– Connectable conductor cross-sections,
finely stranded with wire end pro-
cessing
– Connectable conductor cross-sections
for AWG cables
Design of electrical connection for control
supply voltage
– Connectable conductor cross-sections
with wire end processing
– Connectable conductor cross-sections
for AWG cables
Technical specifications
13.4 Technical specifications for I/O module
6BK1900-0BA00-0AA0
500 mA
2x 18 pole connector with spring-loaded connec-
tion
1x (0.2 ... 1.5 mm²)
1x (0.25 ... 1.5 mm²)
1x (24 ... 16)
2x 18 pole connector with spring-loaded connec-
tion
1x (0.25 ... 1.5 mm²)
1x (24 ... 16)
system interface
18
LED green = Ready, LED red = Error display, 1
LED yellow per output: LED on - H status; LED
off -L status
Yes
III
2
Limit value in accordance with IEC 61000-6-
4:2007 + A1:2011
4 kV contact discharge / 8 kV air discharge
10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0
GHz), 1 V/m (2.0 ... 2.7 GHz)
2 kV signal lines
DC supply cables: 0.5 kV balanced and unbal-
anced
10 V (0.15 ... 80 MHz)
183