Rs-232-C - Siemens SINUMERIK 840D sl Operating Manual

Note
Program selection
If a directory contains a main program as well as an RPA file or a GUD file with the same name,
initially these files are automatically started when the main program is selected. Tool data or
parameters may accidentally be changed as a result.
12.19

RS-232-C

12.19.1 Reading-in and reading-out archives via a serial interface
You have the option of reading out and reading in archives in the "Program manager" operating
area as well as in the "Startup" operating area via the V24 serial interface.
Availability of the V24 serial interface
If you want to change the availability of the V24 interface, you can adjust the following
parameters in file "slpmconfig.ini":
Parameters
[V24]
useV24
Storage of file "slpmconfig.ini"
The template of the file "slpmconfig.ini" for SINUMERIK Operate is stored in the following
directory:
<Installation path>/siemens/sinumerik/hmi/template/cfg
Copy the file to one of the following directories:
<Installation path>/user/sinumerik/hmi/cfg
Universal
Operating Manual, 05/2017, A5E40868517
Machine manufacturer
Please refer to the machine manufacturer's instructions.
Description
Describes the section in which the relevant setting parameters
are located.
Setting for the availability of the V24 serial interface
Interface and softkeys are available (de‐
= true
fault)
Interface and softkeys are not available
= false
Managing programs
12.19 RS-232-C
305