Display G And Auxiliary Functions - Siemens SINUMERIK 840D sl Operating Manual

Activating user variables
6.12

Display G and auxiliary functions

6.12.1 Selected G functions
16 selected G groups are displayed in the "G Function" window.
Within a G group, the G function currently active in the controller is displayed.
Some G codes (e.g. G17, G18, G19) are immediately active after switching the machine control
on.
Which G codes are always active depends on the settings.
G groups displayed by default
Group
G group 1
G group 2
G group 3
G group 6
Universal
Operating Manual, 05/2017, A5E40868517
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6. Define the desired user variable.
7. Press the "Exit" softkey to close the editor.
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be retained
- OR -
Select whether the current values in the definition files should be deleted.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
Modally active motion commands (e.g. G0, G1, G2, G3)
Non-modally active motion commands, dwell time (e.g. G4, G74, G75)
Programmable offsets, working area limitations and pole programming (e.g.
TRANS, ROT, G25, G110)
Plane selection (e.g. G17, G18)
Machining the workpiece
6.12 Display G and auxiliary functions
139