Changing A Tool Type - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
11.10 Changing a tool type
Parameter
D quantity
D
Monitoring type
Tool life, count and wear
Tool life, count and wear
Tool life, count and wear
Monitoring OEM parame‐
ters 1 - 8
11.10
Changing a tool type
Procedure
...
246
Meaning
Number of created cutting edges
Cutting edge number
T - tool life
C - count
W - wear
The wear monitoring is configured via machine data.
Please note the specifications of the machine manufacturer.
Actual value
Actual value for tool life, count or wear
Setpoint
Setpoint for tool life, count or wear
Prewarning limit
Specification of the tool life, the count or wear at which a warning is displayed.
1.
The tool list, the wear list, the OEM tool list or the magazine is opened.
2.
Position the cursor in the column "Type" of the tool that you wish to
change.
3.
Press the <SELECT> key.
The "Tool types - Favorites" window opens.
4.
Select the desired tool type in the list of favorites or select using the soft‐
keys "Cutters 100-199", "Drill 200-299", or "Spec. tool 700-900".
5.
Press the "OK" softkey.
The new tool type is accepted and the corresponding icon is displayed in
the "Type" column.
Operating Manual, 05/2017, A5E40868517
Universal
Advertisement
Table of Contents
