Procedure
6.17.2.5
Rotating the view
You can change the orientation of the drawing.
Requirement
The DXF file is open in the Program Manager or in the editor.
Procedure
...
Universal
Operating Manual, 05/2017, A5E40868517
1.
Press the "Details" and "Magnifying glass" softkeys.
A magnifying glass in the shape of a rectangular frame appears.
2.
Press the <+> key to enlarge the frame.
- OR -
Press the <-> key to reduce the frame.
- OR -
Press a cursor key to move the frame up, down, left or right.
3.
Press the "OK" softkey to accept the section.
1.
Press the "Details" and "Rotate figure" softkeys.
2.
Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" or "Arrow counter-clockwise" softkey to change the position of
the drawing.
Machining the workpiece
6.17 Working with DXF files
153