Auxiliary Functions - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Procedure
6.12.4
Auxiliary functions
Auxiliary functions include M and H functions preprogrammed by the machine manufacturer,
which transfer parameters to the PLC to trigger reactions defined by the manufacturer.
Displayed auxiliary functions
Up to five current M functions and three H functions are displayed in the "Auxiliary Functions"
window.
Procedure
...
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Machine" operating area
2.
Press the <JOG>, <MDI> or <AUTO> key.
3.
Press the ">>" and "All G functions" softkeys.
The "G Functions" window is opened.
1.
Select the "Machine" operating area.
2.
Press the <JOG>, <MDA> or <AUTO> key.
3.
Press the "H functions" softkey.
The "Auxiliary Functions" window opens.
4.
Press the "H functions" softkey again to hide the window again.
Machining the workpiece
6.12 Display G and auxiliary functions
143
Advertisement
Table of Contents
